4. Final Electronics Wiring & Arm Installation

Tools for this section

• Black Allen Key

Parts for this section

• (1x) Airframe Top

• (1x) SIK Radio

• (2x) Adhesive Strips

• (4x) Genesis Motor Arms

• (4x) Jetson PAB Spacer

• (4x) M3x14 Socket Head Cap Screws

Ensure you have sourced the following parts (not included in the kit):

• ARK Jetson PAB Bundle (Jetson Orin NX or Orin Nano)

• ARK 4 in 1 ESC

• ARK FLOW (Optional but recommended)

• RC Radio system of your choice

Step 1: Final Wiring Prep

General Wiring Guide

This is a reference guide. For specific pinouts, please refer to the ARK Electronics Documentation: Ark Jetson PAB

ARK 4 in 1 ESC

ARK FLOW

ARK TESO

For details on Pixhawk hardware standard drone electronics pinout, please refer to the PX4 Wiring Guide

Step 2: Motor Arm Wiring

Genesis Arm Installation Diagram

Step 3: Jetson PAB Installation

Gently hand-tighten the screws to the Jetson PAB board only! Overtightening the screws may damage the PCB.

You are ready to move onto Section 5.