K9 Defense Tech
WebsiteUpdates
Genesis
Genesis
  • Overview
  • Drone Specifications
  • Getting Started
    • Genesis UAV Variants
  • Genesis
    • Part Chooser
      • Genesis Hardware Kit (Archived)
      • Genesis Full Frame Kit (Archived)
      • 3D Printed Parts
        • Materials & Print Settings
        • Genesis Digital FPV Main Body
      • Hardware
        • Sheet Parts
        • Propellers
        • Arm Tubes
        • Fasteners
      • Electronics
        • Motor
        • ESC
        • Flight Controller
        • GPS
        • FPV System
        • Radio & RC Receiver
        • Battery
        • Wire & Connectors
    • Genesis Assembly Manual
      • 1. Part Preparation
      • 2. Arm Assembly
      • 3. Airframe Structure
      • 4. FPV, USB, & RX Electronics
    • Genesis CAD File
  • Genesis Bravo (NDAA)
    • Bravo
      • Genesis Bravo FPV Kit (Archived)
      • Kit Assembly Manual (Archived)
        • 1. Part Prep & Unboxing
        • 2. FPV Cam Mount & Arm Brackets
        • 3. Arm Integration and Alignment
        • 4. Electronics
        • 5. Final Frame Assembly
        • 6. Battery Mount, Props, & Antenna Installation
      • BOM (Archived)
      • Digital FPV (Archived)
      • CAD File (Archived)
    • Bravo 2
      • Genesis Bravo 2 Kit (Frame + Motor)
        • Kit Assembly Manual
          • Kit Parts List
          • 1. Introduction
          • 2. Mounting ARK Teseo & ARK FLOW
          • 3. FPV Camera Mount
          • 4. PCB & Electronics Stack Insallation
          • 5. Antenna Mount Installation
          • 6. Electronics Installation & Wiring
          • 7. Arm Installation
          • 8. Battery Mount & Landing Gear
          • 9. Propeller Installation
      • Genesis Bravo 2 Kit (ARK Bundle)
        • Kit Assembly Manual
          • Kit Parts List
          • 1. Introduction
          • 2. Electronics Installation & Wiring
          • 3. Arm Installation
          • 4. Battery Mount & Landing Gear
          • 5. Propeller Installation
      • Bravo 2 PCB Files
  • Genesis Edge AI (NDAA)
    • Genesis Edge AI Kit (Frame + Motor)
      • Kit Assembly Manual
        • Kit Parts List
        • 1. Introduction
        • 2. PD Board & ESC Installation
        • 3. ARK Flow & Camera Installation
        • 4. Final Electronics Wiring & Arm Installation
        • 5. Top Assembly & Arm Mounting
        • 6. Landing Gear & Antenna Installation
        • 7. Propeller Installation
    • Edge AI CAD File
  • Software Setup & First Flight
    • Flight Software Setup
  • Developer resource
    • Genesis Payload Rail Standard
  • Legal Info
    • License
    • Disclaimer
Powered by GitBook
On this page

Drone Specifications

The specifications will vary based on setup, motor selection, battery selection, frame type, etc. The metrics below should only be used for reference.

Stat
Value
Freedom Units

Airframe Weight

1.8 kg (Carbon Fiber)

2.2 lbs

Airframe Weight with Battery

2.65 kg (Carbon Fiber)

5.8 lbs

Blade Diameter

15" ~ 20"

15" ~ 20"

Flight Time

15 ~ 40+ min

15 ~ 40+ min

Max speed

100+ km/hr

62+ mph

Climb Rate

16 m/sec

35.7 mph

Thrust to Weight Ratio

6.1/1

6.1/1

Max Payload

4 kg

8.8 lbs

Do Not Exceed Payload

5 kg

11 lbs

Nominal Payload

2 kg

4.4 lbs

PreviousOverviewNextGenesis UAV Variants

Last updated 4 months ago

Page cover image