9. Propeller Installation

Propeller installation should only be done once the drone is ready to fly. Never have the propellers installed on the drone while you are working on the airframe or configuring its software.

Tools for this section

• Black Allen Key

Parts for this section

• (4x) Propeller Washer

• (8x) Propeller Screws (m3x8)

• (2x) Clock-Wise 15x5.5 Propeller

• (2x) Counter-Clockwise 15x5.5 Propeller

Propeller Installation Diagram:

Follow the diagrams below for propeller installation. Ensure that the clockwise and counterclockwise propellers are installed to the correct arms (see propeller orientation diagram). Hand-tighten the screws only, do not use power tools.

Assembly:

Propeller Orientation:

• Ensure that the propellers are installed to the correct corresponding arms.

• HAND TIGHTEN the propeller screw only, do not use power tools.

• Check that the propellers are securely fastened.