3D Printed Parts

As of April 2025, this page is stored for archival purposes. K9 has replaced the Genesis drone family to the newly improved Genesis Bravo 3.

Genesis is designed to use a variety of FDM printed parts optimized for accessible and economical desktop 3D printers. Ensure that mechanically adequate materials and print settings are selected before printing (Materials & Print Settings).

Main Body

Recommended Print Orientation:

Recommended Supports:

For a Digital FPV build, do not print this file. Print the modified main body here.

701KB

Genesis Main Body.3mf

Open

Top Plate

Recommended Print Orientation:

No supports are needed.

96KB

Genesis Top Plate.3mf

Open

Arm Bracket

Recommend Print Orientation:

No supports are needed. Ensure 4 brackets are printed.

83KB

Genesis Arm Mount.3mf

Open

Motor Mount

Recommend Print Orientation:

Recommended Supports:

Ensure 4 brackets are printed.

456KB

Genesis Motor Mount.3mf

Open

Landing Gear

Recommended Print Orientation:

No supports are needed. Ensure 4 brackets are printed. Make sure to print using flexible material like TPU.

155KB

Genesis Landing Gear.3mf

Open

FPV Camera Mount

Recommend Print Orientation:

248KB

Genesis FPV Camera Mount.3mf

Open

Battery Mount

Recommended Print Orientation:

Recommended Supports:

Ensure 2 battery mounts are printed. Ensure to use 100% infill.

237KB

Battery Mount.3mf

Open

Rubber Stencil Tool

Recommended Print Orientation

No supports are needed.

7KB

Rubber Stencil Tool.3mf

Open

Arm Alignment Tool

Recommended Print Orientation:

No supports are needed. Ensure 4 Aligners are printed.

171KB

Arm Alignment Tool.3mf

Open

Printed Parts Checklist

Part	Quantity	Material	Support	Recommended Infill
Main Body	1x	PLA, ASA, PETG	Yes	15-60%
Top Plate	1x	PLA, ASA, PETG	No	15-25%
Arm Bracket	4x	PLA, ASA, PETG	No	25-70%
Motor Mount	4x	PLA, ASA, PETG	Yes	25-70%
Landing Gear	4x	TPU, FLEX	No	15%
FPV Camera Mount	1x	PLA, ASA, PETG	No	70%
Battery Mount	2x	PLA, ASA, PETG	No	70%
Rubber Stencil Tool	1x	PLA, ASA, PETG	No	15-100%
Arm Alignment Tool	4x	PLA	No	15%