4. PCB & Electronics Stack Insallation

Tools for this section

• Black Allen Key

• Soldering Iron

• Solder Flux

• Solder

Parts for this section

• (1x) Genesis PD Board

• (4x) M3x14 Socket Head Cap Screws

• (4x) Vibration Isolator

Ensure you have sourced the following parts (not included in the kit):

• (1x) ARK 4 in 1 ESC

• (1x) ARK FPV FC

Step 1: ARK 4 in 1 ESC & PD Board Installation

Step 2: Soldering

Step 3: Checking

Ensure that the solder joints are. Check that the solder joint:

• Have a consistent shiny surface

• The pads on both components are evenly covered with solder

• Solder is pooled within the joints

• Have a round liquid puddled shape

• There is no bridging

• There is no splatter or droplets near the joint that could interfere with the components on the ESC

• There is no excess solder pooling off the joint

Step 4: ARK FPV FC Installation

You are ready to move onto Section 5.