> For the complete documentation index, see [llms.txt](https://docs.k9defense.tech/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.k9defense.tech/genesis/genesis-bravo-ndaa/bravo-2/genesis-bravo-2-kit-ark-bundle/kit-assembly-manual/5.-propeller-installation.md).

# 5. Propeller Installation

{% hint style="warning" %}
As of April 2026, this page is stored for archival purposes. K9 has replaced the Genesis drone family to the newly improved Genesis Bravo 4. Please visit the[ Bravo 4 Docs](https://docs.k9defense.tech/genesis-bravo-4) for the latest information.
{% endhint %}

{% hint style="danger" %}
Propeller installation should only be done once the drone is ready to fly. **Never** have the **propellers installed** on the drone while you are **working on the airframe** or **configuring its software.**
{% endhint %}

## Tools for this section

* Black Allen Key

## Parts for this section

* (4x) Propeller Washer
* (8x) Propeller Screws (m3x8)
* (2x) Clock-Wise 15x5.5 Propeller
* (2x) Counter-Clockwise 15x5.5 Propeller

## Propeller Installation Diagram:

Follow the diagrams below for propeller installation. Ensure that the clockwise and counterclockwise propellers are installed to the correct arms (see propeller orientation diagram). Hand-tighten the screws only, do not use power tools.

### Assembly:

<figure><img src="https://3393044266-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzAObEfh8Sd4FnPkx6tU1%2Fuploads%2Fzt5iWXt9hdL8zHKiUvwm%2F1321dwe.png?alt=media&amp;token=0c5abf63-e459-480d-a5f8-e7e2262a9ade" alt=""><figcaption></figcaption></figure>

### Propeller Orientation:

<figure><img src="https://3393044266-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzAObEfh8Sd4FnPkx6tU1%2Fuploads%2FUJAWdEQlWJVTOlVKMcfd%2FRotor%20Direction%20Diagram.png?alt=media&amp;token=ef76eacf-918d-4f34-a5bd-0e77a5134bbc" alt=""><figcaption></figcaption></figure>

{% hint style="warning" %}

* Ensure that the propellers are installed to the correct corresponding arms.
* **HAND TIGHTEN** the propeller screw only, do not use power tools.
* Check that the propellers are securely fastened.&#x20;
  {% endhint %}
