> For the complete documentation index, see [llms.txt](https://docs.k9defense.tech/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.k9defense.tech/genesis-bravo-4/pilot-manual/quick-start.md).

# Quick-Start

## 1. Unpacking

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FgwQNtePWiOcWWONX5Fcd%2FOverview.png?alt=media&amp;token=906b9f95-f42c-4810-b48b-8fb3a5c6347b" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
The following information is simply covering the bare essentials necessary for the quick-start guide. The content may vary based on what configuration or combination you have ordered.
{% endhint %}

1. Genesis Bravo-4 Drone
2. 4x Propellers (2 red, 2 black)
3. Mission Radio
4. Tango II Controller
5. 2x Long C2 Antenna
6. 1x FPV Antenna
7. 2x Short C2 Antenna
8. Battery
9. XT60-XT90 Power Adaptor
10. Laptop / Phone / Tablet
11. Optional: FPV Goggles

***

## 2. Controller Setup

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FTm5kmFnPObedOuvv30k6%2F20260525_192133.jpg?alt=media&amp;token=6e37eae0-428a-4cc8-8a17-4a9360e0c647" alt=""><figcaption></figcaption></figure>

* Ensure all the switches and sticks are in their default position (as pictured; left stick should be at center-bottom and right stick should be centered).

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FoJlvRD0ylHL1Jf8PUTVw%2F20260525_192133.jpg?alt=media&amp;token=5d4d3879-3c73-4553-87c6-c3b7d31f090a" alt="" width="375"><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FeNKR5EgdFEgGPrLJRvNA%2F20260525_192139.jpg?alt=media&amp;token=1648cc50-1e9c-4d90-aa64-2fe6e9241550" alt="" width="375"><figcaption></figcaption></figure></div>

* Extend controller antenna.

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F73NAIZzJVcFchseAD9CS%2F20260525_192146.jpg?alt=media&amp;token=d3e511b0-341a-4bae-b464-65d742a82507" alt=""><figcaption></figcaption></figure>

* Press and hold power button to turn controller on.

***

## 3. Basic GCS Setup

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FqdfEF47VbeODEcxUW7wI%2F20260525_192200.jpg?alt=media&amp;token=68b11d4a-1abe-49d8-b481-6c04134e5b57" alt=""><figcaption></figcaption></figure>

* Open QGroundControl (QGC). For PC, open the desktop app; for phones or tablet open the android app.
* Refer to QGC Setup page to learn how to pair your mission radio to QGC if you have not already done so.

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FxLlI8CJJ5Xe5Fivph9ci%2F20260525_192233.jpg?alt=media&amp;token=31de8759-0859-4950-b2a9-f6a6442c48a2" alt=""><figcaption></figcaption></figure>

* Connect Mission Radio via USB to the GCS device.

***

## 4. Drone Antenna Setup

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FRosRZNWzZrwK5DcD8njp%2F20260525_193015.jpg?alt=media&amp;token=696a382e-2e41-4bb2-b115-42a7e34681ec" alt=""><figcaption></figcaption></figure>

* Attach the 5.8 GHz FPV Antenna to the middle connector by screwing it onto the antenna mount.

{% hint style="warning" %}
Throughout this step, ensure the antenna is securely screwed on. **HAND TIGHTEN ONLY**, DO **NOT** USE ANY TOOLS as this may **permanently** damage the antenna mount.
{% endhint %}

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F3Bbkn1etpo4kF2HXbu2d%2F20260525_193145.jpg?alt=media&amp;token=f594c800-81ed-4c98-ab16-0491068a1522" alt="" width="375"><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FuzPabNM9WNJmPwtFB0Xj%2F20260525_193203.jpg?alt=media&amp;token=435e7c99-8d97-49be-93fd-07810dc0eb9e" alt="" width="375"><figcaption></figcaption></figure></div>

* Screw on both Long C2 Antennas to the two remaining side connectors on the antenna mount.

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2Fx2SsbpNUXJxDd82ogW1X%2F34e4ew.png?alt=media&amp;token=ac601d80-7b83-405b-a648-74896a04439a" alt=""><figcaption></figcaption></figure>

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FNIyb43LXBapbpKdzpemI%2F20260525_193347.jpg?alt=media&amp;token=f26109c3-5266-406f-8514-c2537376c283" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FCwpLVp2hMgGc9WMPOB9H%2F20260525_193419.jpg?alt=media&amp;token=ae400cf5-a805-47bd-8217-4aaa67aaf7cf" alt=""><figcaption></figcaption></figure></div>

* Locate side antenna mounts.
* Screw on both Short C2 Antennas to the the antenna connectors on each side of the drone.

***

## 5. Drone Propeller Installation

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FRQyd5hHRNlytDDIh6H96%2F20260525_193612.jpg?alt=media&amp;token=6bec805b-6f31-46c2-95b2-9bebb26fba7b" alt="" width="375"><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F7TeO5UkiiCJ5CnmXz0tX%2F20260525_193631.jpg?alt=media&amp;token=2b3e0b96-7e0d-479f-973d-d0812314bb7c" alt="" width="375"><figcaption></figcaption></figure></div>

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FdauiK6HoyWKzrJ3i4cTk%2F20260525_193644.jpg?alt=media&amp;token=fb3cf30b-552f-4b0e-981d-18dcb1407be1" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FpJJJ7ubUHrhbLrtbuQXM%2F20260525_193649.jpg?alt=media&amp;token=43ff3651-4e27-4133-8775-a130abe31760" alt=""><figcaption></figcaption></figure></div>

* Install propellers to the matching colors (2x Black and 2x Red).
* To install a propeller, simply pinch the quick release pin inwards and align the propeller perpendicular to the connector (as pictured, connector latch should be parallel with connector base).
* Ensure that the connector is fully engaged and locked.

***

## 6. Battery Installation

{% hint style="warning" %}
Ensure Battery is fully charged before flight. Please refer to Charging/Storing Batteries page for more details on charging and battery care.
{% endhint %}

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F63rErMJoCV7OXvnNVFpu%2F20260525_193902.jpg?alt=media&amp;token=cfe76794-1dfe-4a4a-8278-c74be2524154" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FHTdHTPYLzjLUQDUKjqf5%2F20260525_193916.jpg?alt=media&amp;token=b5719461-c7b4-4045-a90c-968bd7887f7f" alt=""><figcaption></figcaption></figure></div>

* Plug XT60-XT90 adaptor into the battery connector located in the back of the drone

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FMfdyh64PNzX3AP1UdcvR%2F20260525_193949.jpg?alt=media&amp;token=8fe83dcb-d142-405d-b38c-c590b3646b2c" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FoTOMpLG4Rpy4HpoBbi9M%2F20260525_194001.jpg?alt=media&amp;token=5b5e67f7-af0e-4d5d-9b8d-ed028872be0c" alt=""><figcaption></figcaption></figure></div>

* Center a fully charged battery above the battery mount.

{% hint style="warning" %}
ENSURE GPS ANTENNA LABELED “KEEP CLEAR” IS NOT COVERED BY THE BATTERY!

<img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FOin7juy8dHMd7F6ayMja%2F53e3.png?alt=media&amp;token=175f74e6-182c-4e98-b5e7-340baeff3190" alt="" data-size="original"><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F84XWrFtlpmdzAQ7nK9S4%2Ft45r4e.png?alt=media&amp;token=ae9a58a8-69c3-4ac9-a237-03cccbef7e19" alt="" data-size="original">
{% endhint %}

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FvHCB7VvvB8iYTw7lB5se%2F20260525_194304.jpg?alt=media&amp;token=fc1c0a1f-63c8-4038-ae0b-f76d7a6faa0a" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FNbztteXsxxJjlXgStceg%2F20260525_194307.jpg?alt=media&amp;token=1e794f67-db62-42d6-8e34-78ad0fd00124" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2Fsr5ZbcAzAL6eKGCJWnc4%2F20260525_194336.jpg?alt=media&amp;token=a8c3cd32-4dc7-4336-b1d1-e764b1f88fc4" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FLcDiQ1VnWMoHhSUJXsOG%2F20260525_194343.jpg?alt=media&amp;token=327c3e53-a2e1-47bf-993c-700198780912" alt=""><figcaption></figcaption></figure></div>

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F0eq3Vfa7RAagir6olENb%2F20260525_194344.jpg?alt=media&amp;token=aa8f91ac-c702-4892-8e89-4c0bd78cc2d9" alt=""><figcaption></figcaption></figure>

* Strap the battery in place using the provided velcro battery straps.
* Ensure the battery is taught and the straps are sufficiently tightened.

***

## 7. Flight Preparation

Locate a safe take off area to setup the drone.

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FrOVzUiLkc3YQqy0P5n5a%2F54d.png?alt=media&amp;token=91c9cc9c-bd63-48b8-b9d2-8fcf4c3ff89c" alt=""><figcaption></figcaption></figure>

* Ensure a 10 foot radius around the drone clear of any obstacles.
* Ensure the drone has a clear view of the sky with no obstructions.
* Ensure the GCS and Controller is powered on before the drone is.

{% hint style="success" %}
Once all the steps are complete, plug the battery into the drone. Stay clear of the drone.
{% endhint %}

***

## 8. Flight Control Overview

### Flight Modes

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2F72Uo4Kt61PBNtRA2VSp0%2F20260525_195104.jpg?alt=media&amp;token=0bc31f6e-ca72-4d4e-b2be-ad7e081e3f2a" alt=""><figcaption></figcaption></figure>

* Flight Modes can be changed using the right side 3 position switch.
* The default flight mode is "Position" (Recommended Flight Mode)

#### Flight Mode Types:

{% tabs %}
{% tab title="Position" %}
RECCOMENDED FLIGHT MODE FOR BEGINNER PILOTS

In Position Mode the drone will hold its position in 3D space when all the sticks are centered.

{% hint style="warning" %}
THIS MODE REQUIRES 3D GPS FIX
{% endhint %}
{% endtab %}

{% tab title="Altitude " %}
In Altitude Mode the drone will hold its altitude and yaw, and stabilize pitch and roll when all the sticks are centered. The drone will not hold position for pitch and roll, which means the drone will drift with the wind. It is up to the pilot to hold the drones lateral position.\
\
Altitude Mode allows the drone to fly more aggresively and gives the pilot more control. Altitude Mode does not require a GPS Fix.
{% endtab %}

{% tab title="RTL" %}
Return To Launchsite will allow the drone to autonomously return and land from its take off point.

The drone will climb to a designated altitude (By default 90 ft), traverse to its take off location, and autonmously land within 2 meters of the take off point. Moving the sticks while in this mode will automatically change the flight mode to Position or if there is a loss in GPS Altitude mode.\
\
To learn to set RTL paramters please check the settings page.

{% hint style="warning" %}
THIS MODE REQUIRES 3D GPS FIX
{% endhint %}
{% endtab %}
{% endtabs %}

### Joystick Control Overview

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FXgCMNaOnjFunHyPA7xF3%2Fjoystick.png?alt=media&amp;token=ec5023c0-012a-46d6-8da5-7ce2b8198714" alt=""><figcaption></figcaption></figure>

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FbM4QHoXieB3Fv6zjV621%2F432we3.png?alt=media&amp;token=2f3c0671-5caa-4bbf-bb52-f7d7806d086f" alt=""><figcaption></figcaption></figure>

### Arm/Disarm

{% tabs %}
{% tab title="ARM" %}
To Arm drone, push the left joystick into the bottom right corner.

{% hint style="danger" %}
ARMING DRONE WILL SPIN ALL THE MOTORS. STAY CLEAR OF DRONE.
{% endhint %}

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FxwoPsqcNqLL8gcCnxxMY%2F20260525_195130.jpg?alt=media&amp;token=719fd908-c379-417a-97cb-2e99b1902f9e" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="DISARM " %}
To Disarm drone, push the left joystick into the bottom left corner.

{% hint style="danger" %}
DISARMING DRONE WILL STOP ALL THE MOTORS. DO NOT DISARM IN FLIGHT OR THE DRONE WILL CRASH.
{% endhint %}

<figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FJDfJfzkpIANMHkkV36ga%2F20260525_195135.jpg?alt=media&amp;token=ac24baf7-a2a8-492a-87b0-76f5626c57df" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### !! FLIGHT TERMINATION !!

<div><figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2Fyfhvvp4igd9O4mDvYOF8%2F20260525_195113.jpg?alt=media&amp;token=44f387e3-7ba6-43f8-8a03-237de50abe4a" alt=""><figcaption></figcaption></figure> <figure><img src="https://269146818-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBEc585FxYwPloyu5c5u7%2Fuploads%2FuuIT44nHqD8y681FIa8L%2F20260525_195116.jpg?alt=media&amp;token=24ed14c2-9606-45fa-b959-04ffb974e9d9" alt=""><figcaption></figcaption></figure></div>

{% hint style="danger" %}

## PRESSING THE FLIGHT TERMINATION E-STOP WILL CUT POWER TO THE DRONE COMPLETLEY. IF THE DRONE IS IN THE AIR, IT WILL FALL OUT THE SKY. DO NOT PRESS EXCEPT FOR EMERGENCIES. KEEP THE SAFTEY FLAP CLOSED.

{% endhint %}

***

## 9. First Flight
