> For the complete documentation index, see [llms.txt](https://docs.k9defense.tech/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.k9defense.tech/exodus/exodus-lite/exodus-lite-technical-resources/extended-landing-gear.md).

# Extended Landing Gear

## Recommended Materials

| Material | Notes                                                                                                                                 |
| -------- | ------------------------------------------------------------------------------------------------------------------------------------- |
| PLA      | Easiest to print but not recommended outside of temporary repairs as the material can warp or deform in direct sunlight.              |
| PETG     | Easy to print though it may deform in hotter climates.                                                                                |
| ABS      | Recommended for durability and heat resistance. Produces hazardous fumes while printing, ensure printing area is properly ventilated. |
| ASA      | Recommended for durability and heat resistance. Produces hazardous fumes while printing, ensure printing area is properly ventilated. |

***

## Fasteners

{% hint style="info" %}
Note the quantities listed below are for one landing leg assembly. A drone will require 4 assemblies total.
{% endhint %}

| Part Name                 | Quantity |
| ------------------------- | -------- |
| M3 Square Nut             | 4x       |
| M3 x 20 Socket Head Screw | 2x       |
| M3 x 25 Socket Head Screw | 2x       |

***

## Print Files

<details>

<summary>Bracket (Square Nut Side)</summary>

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FqCKC6lvJPVp2BPokuEmF%2FBracket%20Screw%20Square%20Nut%20Side.png?alt=media&amp;token=c8a13c1b-d279-482d-a70f-9eee1de4d904" alt="" width="563"><figcaption></figcaption></figure>

#### Recommended Print Orientation

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FLiXrC8V4wziMwKOF2OzP%2Fsese33.PNG?alt=media&amp;token=158a051f-1022-487c-b874-343e45852783" alt="" width="563"><figcaption></figcaption></figure>

{% hint style="success" %}
4x needed per drone (One per arm). Use build plate supports.
{% endhint %}

{% file src="/files/peH9CN32Sgep5TraG6hz" %}

</details>

<details>

<summary>Bracket (Screw Square Nut Side)</summary>

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2ForcB8M0nRR03sCO1wL8B%2FBracket%20Screw%20Side.png?alt=media&amp;token=29332ab9-9c67-49d0-b5aa-287700712b09" alt=""><figcaption></figcaption></figure>

#### Recommended Print Orientation

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FNCTFqg2Rhgcy3zkqESJb%2F43e33w23.PNG?alt=media&amp;token=169bc2dd-a8c6-4965-a21d-8c1c849b61c5" alt=""><figcaption></figcaption></figure>

{% hint style="success" %}
4x needed per drone (One per arm). Use build plate supports.
{% endhint %}

{% file src="/files/8MqxhoAwo3cxtUjB7bRi" %}

</details>

<details>

<summary>Landing Leg</summary>

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FCPqiRWLd98PpjwB2gi7w%2FLanding%20Leg.png?alt=media&amp;token=a8f17702-e561-4ced-a489-76c242acd5f1" alt=""><figcaption></figcaption></figure>

#### Recommended Print Orientation

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FK4rsTjwogRlpdnym7XRt%2F43e333.PNG?alt=media&amp;token=93797863-6e7e-4dae-825b-9b4167e48b42" alt=""><figcaption></figcaption></figure>

{% hint style="success" %}
4x needed per drone (One per arm). No print supports needed.
{% endhint %}

{% file src="/files/1BKofmqERE5Dzkc6ncK9" %}

</details>
