> For the complete documentation index, see [llms.txt](https://docs.k9defense.tech/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.k9defense.tech/exodus/exodus-dev-technical-resources/radio-i-o-and-power.md).

# Radio I/O & Power

Exodus features default integration with the Silvus SL5200, or any alternate IP radio. This page covers the various I/O and power output for radios.

{% hint style="success" %}
Pin Number 1 is always indicated with a white square.
{% endhint %}

## Radio I/O & Power

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FMINEQwVQmYV2q6wuBJdW%2Fexodus%20radio%20io%20diagram%202.png?alt=media&amp;token=edfe6d08-dd1e-45f9-9c36-1e3b63a9493d" alt=""><figcaption></figcaption></figure>

###

### 5v Out (#8)

JST GH (6 Pin)

| Pin Number | Signal |
| ---------- | ------ |
| 1          | 5v     |
| 2          | 5v     |
| 3          | 5v     |
| 4          | GND    |
| 5          | GND    |
| 6          | GND    |

###

### RS232 (#9)

{% hint style="info" %}
This port is connected to TELEM 3 (UART 2) of the ARK FPV Flight Controller.
{% endhint %}

{% hint style="warning" %}
UART is always mapped to opposite pairs (RX to TX, TX to RX) requiring inverted wiring. The UART port  on Exodus Dev already has the pairs inverted, so only a 1:1 connection between the radio and mainboard is needed. DO NOT invert any signal pairs between the drone and radio.
{% endhint %}

{% hint style="danger" %}
This port is connected to the RS232 port with the Silvus I/O (#10) connector. If the Silvus I/O (#10) connector is used, do not use this port.
{% endhint %}

JST GH (4 Pin)

| Pin Number | Signal                          |
| ---------- | ------------------------------- |
| 1          | RX In (Swaps to TX on FC Side)  |
| 2          | TX Out (Swaps to RX on FC Side) |
| 3          | Unused                          |
| 4          | GND                             |

###

### Silvus I/O (#10)

{% hint style="warning" %}
Covered under NDA with Silvus Technologies. Please reach out to Silvus Technologies for more information.
{% endhint %}

###

### 12v Power (#12)

JST SFK (2Pin)

| Pin Number | Signal            |
| ---------- | ----------------- |
| 1          | 12v + (left side) |
| 2          | GND               |
