> For the complete documentation index, see [llms.txt](https://docs.k9defense.tech/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.k9defense.tech/exodus/exodus-dev-technical-resources/compute-i-o-and-power.md).

# Compute I/O & Power

Exodus Dev Features built in I/O for top mountable compute.&#x20;

{% hint style="success" %}
Pin Number 1 is always indicated with a white square.
{% endhint %}

## Compute Data I/O

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FNKEZQK7NCrQI0gUnGWOD%2Fexodus%20payload%20io%20diagram%201.png?alt=media&amp;token=c94c428d-f196-4af5-9906-01d9536f6103" alt=""><figcaption></figcaption></figure>

###

### Ethernet-2 (#1)

{% hint style="info" %}
Ethernet-2 Output has two JST GH Connectors: a 8 pin and 4 pin. Only one can be used at a time. Use the 4 pin for standard Ethernet, and use the 8 pin full gigabit Ethernet.\
\
Ethernet-2 is connected to the onboard gigabit Ethernet Switch.
{% endhint %}

{% hint style="warning" %}
Ethernet-2 is unused by default. If Compute need to be connected to the network switch, it will require a JST to RJ45 adapter.
{% endhint %}

#### (4 Pin)

JST GH (4 Pin)

| Pin Number | Signal          |
| ---------- | --------------- |
| 1          | ENET 2 B- (RX-) |
| 2          | ENET 2 B+ (RX+) |
| 3          | ENET 2 A- (TX-) |
| 4          | ENET 2 A+ (TX+) |

#### (8 Pin)

JST GH (8 Pin)

<table><thead><tr><th width="374">Pin Number</th><th>Signal</th></tr></thead><tbody><tr><td>1</td><td>ENET 2 A+ (TX+)</td></tr><tr><td>2</td><td>ENET 2 A- (TX-)</td></tr><tr><td>3</td><td>ENET 2 B+ (RX+)</td></tr><tr><td>4</td><td>ENET 2 B- (RX-)</td></tr><tr><td>5</td><td>ENET 2 C+</td></tr><tr><td>6</td><td>ENET 2 C-</td></tr><tr><td>7</td><td>ENET 2 D+</td></tr><tr><td>8</td><td>ENET 2 D-</td></tr></tbody></table>

###

### Silvus USB (#2)

JST GH (4 Pin)

| Pin Number | Signal                                           |
| ---------- | ------------------------------------------------ |
| 1          | 5v + (5v pulled from radio module. 0.5 Amp Max!) |
| 2          | D+                                               |
| 3          | D-                                               |
| 4          | GND                                              |

###

### UART (#3)

JST GH (6 Pin)

{% hint style="info" %}
This UART port is mapped to TELEM 1 (UART 7) of the ARK FPV Flight Controller.
{% endhint %}

{% hint style="warning" %}
UART is always mapped to opposite pairs (RX to TX, TX to RX) requiring inverted wiring. The UART port  on Exodus Dev already has the pairs inverted, so only a 1:1 connection between the compute and mainboard is needed. DO NOT invert any signal pairs between the drone and compute payload.
{% endhint %}

| Pin Number | Signal                           |
| ---------- | -------------------------------- |
| 1          | Unused                           |
| 2          | TX In (Swaps to RX on FC Side)   |
| 3          | RX In (Swaps to TX on FC Side)   |
| 4          | CTS In (Swaps to RTS on FC Side) |
| 5          | RTS In (Swaps to CTS on FC Side) |
| 6          | GND                              |

##

## Compute Power

<figure><img src="https://3295908973-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fb01HmPjtHDbjVUURluQb%2Fuploads%2FAPI1K8uyKLUHfN0niN8f%2Fexodus%20payload%20io%20diagram%202.png?alt=media&amp;token=6a5e5d5b-8622-4756-b7fc-b0e7a4e4185b" alt=""><figcaption></figcaption></figure>

###

### 5v Computer Power (#4)

Molex CLIK Mate (6 pin 2mm pitch)

| Pin Number | Signal |
| ---------- | ------ |
| 1          | 5v+    |
| 2          | 5v+    |
| 3          | Unused |
| 4          | Unused |
| 5          | GND    |
| 6          | GND    |

###

### 5v Out (#5)

XT-30 Male

| Pin Number | Signal             |
| ---------- | ------------------ |
| 1          | GND (Rounded Side) |
| 2          | 5v+ (Flat Side)    |

###

### Battery Voltage Out (#6)

XT-30 Male

{% hint style="danger" %}
This output is UNREGULATED RAW BATTERY VOLTAGE!
{% endhint %}

| Pin Number | Signal             |
| ---------- | ------------------ |
| 1          | GND (Rounded Side) |
| 2          | VBAT+ (Flat Side)  |

###

### 12v Out (#7)

| Pin Number | Signal             |
| ---------- | ------------------ |
| 1          | GND (Rounded Side) |
| 2          | 12v+ (Flat Side)   |
